A hemostatic sponge derived from chitosan and hydroxypropylmethylcellulose.

Abstract

Hemostatic materials are of great significance for rapid control of bleeding, especially in military trauma and traffic accidents. Chitosan (CS) hemostatic sponges have been widely concerned and studied due to their excellent biocompatibility. However, the hemostatic performance of pure chitosan sponges is poor due to the shortcoming of strong rigidity. In this study, CS and hydroxypropylmethylcellulose (HPMC) were combined to develop a safe and effective hemostatic composite sponges (CS/HPMC) for hemorrhage control by a simple mixed-lyophilization strategy. The CS/HPMC exhibited excellent flexibility (the flexibility was 74% higher than that of pure CS sponges). Due to the high porosity and procoagulant chemical structure of the CS/HPMC, it exhibited rapid hemostatic ability in vitro (BCI was shortened by 50% than that of pure CS sponges). The good biocompatibility of the obtained CS/HPMC was confirmed via cytotoxicity, hemocompatibility and skin irritation tests. The CS/HPMC can induced the erythrocyte and platelets adhesion, resulting in significant coagulation acceleration. The CS/HPMC had excellent performance in vivo assessments with shortest clotting time (40 s) and minimal blood loss (166 mg). All above results proved that the CS/HPMC had great potential to be a safe and rapid hemostatic material.

• Authors: Chunyan Yu, Yanju Lu, Jinhui Pang, Lu Li
• Journal: Journal of the mechanical behavior of biomedical materials (J Mech Behav Biomed Mater) Vol. 150 Pg. 106240 (Nov 16 2023) ISSN: 1878-0180 [Electronic] Netherlands
• PMID: 37992582 (Publication Type: Journal Article)
• Copyright: Copyright © 2023 Elsevier Ltd. All rights reserved.